Our Materials
Plastazote® LD70 Foam
Plastazote® LD70 is a strong choice for clean applications, impact protection, body protection, and durable technical components across a wide range of industries.
Characteristics of Plastazote ® LD70
- Lightweight foam with durable performance
- Good impact and shock absorption
- Water repellent closed-cell structure
- Resistant to chemicals, oils, acids, alkalis and solvents
- Good thermal insulation
- Non-toxic and low odour
Key Properties of Plastazote® LD70 Foam
- Density : 70 kg/m
- Shape Recovery : 6%
- Stretchability : 140 kPa
- Shore Hardness : 75 OO
- Cell Size : 0.6mm
- Compressibility : 163 kPa
- Strength : 733 kPa
- Durability : 4020 N/m
- Max Operating Temp : 105°C
Foams manufactured in a selection of colours
Black
White
Red
Blue
Yellow
Green
*Other colours may be available on request. All colours are subject to foam type, minimum order quantity, and suitable masterbatch availability.
Typical performance data for Plastazote® LD70 Foam
| Property | Value | Test Method |
|---|---|---|
| Apparent density | 70 kg/m | BS EN ISO 7214:2012 |
| Cell size | 0.6mm | Internal |
| Shore hardness | 75 OO | BS EN ISO 868:2003 |
| Property | Condition | Value | Test Method |
|---|---|---|---|
| Compression stress | 25% Compression | 163 kPa | BS EN ISO 7214:2012 |
| Compression stress | 50% Compression | 251 kPa | BS EN ISO 7214:2012 |
| Tensile strength | Standard | 733 kPa | BS EN ISO 7214:2012 |
| Tensile elongation | Standard | 140% | BS EN ISO 7214:2012 |
| Tear strength | Method B | 4020 N/m | BS EN ISO 8067:2008 |
| Property | Condition | Value | Test Method |
|---|---|---|---|
| Compression set | 25% comp, 22hr, 23oC, ½ hr recovery | 6% | BS EN ISO 7214:2012 |
| Compression set | 50% comp, 22hr, 23oC, 24 hr recovery | 3% | BS EN ISO 7214:2012 |