Our Materials
ZOTEK® F30 Foam
ZOTEK® F30 is well-suited to lightweight formed parts and demanding applications requiring strong FST performance.
Characteristics of ZOTEK ® F30
- Lightweight closed-cell PVDF foam
- Suitable for thermoformed interior and technical applications
- Flexible performance for shaped components
- Inherent flame resistance
- Excellent chemical resistance
- Good thermal insulation
- Low smoke
Key Properties of ZOTEK® F30 Foam
- Density : 30 kg/m
- Cell Size : 0.27mm
- Compressibility : 50 kPa
- Strength : 400 kPa
- Stretchability : 190 kPa
- Thermal Conductivity : 0.046 W/m.K at 80°C
- Max Operating Temp : 110°C
- Vertical Burn (60s) : Pass at 3 & 25mm
- FAR/CS 25.853 (d) App F Pt IV : Pass at 3, 13 & 25mm
- FAR/CS 25.853 (d) App F Pt V : Pass at 13mm
Foams manufactured in a selection of colours
White
Grey
*Other colours may be available on request. All colours are subject to foam type, minimum order quantity, and suitable masterbatch availability.
Typical performance data for ZOTEK® F30 Foam
| Property | Value | Test Method |
|---|---|---|
| Apparent density | 30 kg/m | BS EN ISO 7214:2012 |
| Cell size | 0.27mm | Internal |
| Property | Condition | Value | Test Method |
|---|---|---|---|
| Compression stress | 25% Compression | 50 kPa | BS EN ISO 7214:2012 |
| Tensile strength | Standard | 400 kPa | BS EN ISO 7214:2012 |
| Tensile elongation | Standard | 190% | BS EN ISO 7214:2012 |
| Property | Condition | Value | Test Method |
|---|---|---|---|
| Compression set | 50% comp, 22hr, 23°C, ½ hr recovery | 13% | BS EN ISO 1856-C:2018 |
| Property | Condition | Value | Test Method |
|---|---|---|---|
| Thermal conductivity | Mean temperature of 0°C | 0.033 W/m.K | ISO 8301 |
| Thermal conductivity | Mean temperature of 40°C | 0.038 W/m.K | ISO 8301 |
| Thermal conductivity | Mean temperature of 80°C | 0.046 W/m.K | ISO 8301 |
| Property | Result | Unit | Test Method |
|---|---|---|---|
| Heat release | Pass | 3, 13 and 25mm | FAR/CS 25.853 (d) App F Pt IV |
| Smoke density | Pass | 13mm | FAR/CS 25.853 (d) App F Pt V |
| Smoke density | Pass | 13mm | ABD0031 para. 7.3.2 |
| Toxic gas emission | Pass | 13mm | ABD0031 para. 7.4 |
| Radiant heat panel | Pass | 3 and 25mm | FAR 25.856 (a) App F Pt VI |
| Vertical burner, (60 sec) | Pass | 1.5, 13 and 25mm | FAR/CS 25.853(a) App F Pt I(a), (1), (i) |